Plaster on the walls is not used separately, but is mixed with a percentage of soil that is sold in stores as soil-plaster. This mortar is obtained by mixing plaster with clay and water and is light brown in color and is used for base coating and preparing the ceiling and walls for whitening. Ready-made soil plaster, Kimia, is one of the best-selling products in Bolour Gatch Saveh Company.

The use of Kimia, the ready-made soil-plaster

.Kimia is suitable for the base coat plaster. This product is used in dry areas

Characteristics of Kimia, the ready-made soil-plaster

This product is produced from the highest quality gypsum and mineral soil mines in a completely standardized way and is offered in the building materials market. The first and final setting time of plaster and soil is high. The initial setting time is 5 to 7 minutes and the final setting time is between 15 and 20 minutes.

The advantages of using Kimia

Saving the cost of buying bulk soil and moving it in floors.

Reducing the occupied space in the workshop compared to the traditional method.

High operating speed and time saving.

Free from any vermin and termites due to simultaneous baking of soil and plaster in the furnace.

Homogeneous and uniform combination of gypsum stone and mineral clay with standard ratio in the factory.

High strength after drying.

Easy to use in bad weather conditions.

The production method of ready-made soil-plaster

In the production of this product, after transferring high-quality and appropriate gypsum to the production line and granulating the raw gypsum, the coarser grains of gypsum are separated in Loburn furnace and the smaller grains together with gypsum soil are separated in Loburn furnace. We place it with indirect heat and then we mix the output product from each furnace to prepare it for grinding.

According to the consumption type of ready-made soil plaster, this product is granulated after baking and grinding using special machines, and then with high-quality and suitable clay whose moisture is completely removed, uniformly are mixed with the ratio National standards and supplied to domestic and foreign markets in suitable packaging.

Types of soil-plaster

Plaster and soil for ceiling and how to use it

It is very easy to use this mortar on the ceiling, and if the ceiling consists of beams and blocks, your work will be much easier because it does not need to be smoothed and leveled.

In the first step, put the mortar on the ceiling and after smoothing it, screed it to smooth the surface and fill the empty spaces. You should screed in a linear and semi-circular way so that your work is done with quality. After that, you need to clean the screeding tool and use it again on the material. Do this until the surface is very smooth.

Plaster and soil for wall and how to use it

At first, we mix a bag of soil-plaster with the right amount of water and use a mixer to harden and set the plaster. Then we start sloping the wall. To slope the wall, first we hammer the bottom and top of the wall with a nail (other methods can also be used) so that 2 cm (depending on the required thickness) remains outside the nail, and then we tie the working string to the two ends of the nail. We close and fill the gap between the string and the wall with soil-plaster, which we repeat with a distance of 1.5 to 2 meters along the wall, and finally we wait for it to dry.

We fill the spaces between slopes with soil-plaster by using a screeding tool. In this way, one end of the bar is placed on the slop and the other end of the bar is placed on the slope next to it, and then we pull from the top to the bottom to remove the excess soil-plaster, which finally gives us the same 2 cm.

.After finishing, we start filling the remaining spaces. Finally, this is how the base of the joinery ends

The price of each bag of ready-made soil-plaster

If you are active on the field of construction, you know that after extracting gypsum stone, special processes are performed on it, which is expensive. That is why the price of gypsum is more expensive than soil, and soil is cheaper because it reaches the consumer directly after extraction. For this reason, it is more economical to use soil-plaster instead of plaster mortar to fill the gaps in the walls and for whitening. The price of ready-made soil-plaster depends on the brand of the product and its quality. The price of ready-made soil-plaster of Kimia from Bolour Gatch Saveh Company is presented in kilos.

Therefore, the price of each bag with different weights is different from each other. Kimia is one of the most widely used types of plaster and construction soil in Iran today; due to its reasonable price and high quality. To know the latest price of Kimia, refer to the numbers in website of Bolour Gatch Saveh.

The best way to buy ready-made soil-plaster

After getting familiar with the characteristics of the ready-made soil-plaster and knowing the price, it is time to order and buy it. You can contact the experts of this collection for more information and price inquiries through the phone numbers listed on the site.

Make an order for Kimia, the ready-made soil-plaster,from Bolour Gatch Saveh Company

As the first and largest producer of ready-made industrial soil-plaster in the country, Bolour Gatch Saveh Company has produced this type of product with the popular brand, Kimia, and a production capacity of 1000 tons per day. Kimia is made using the highest quality and most advanced technology in this factory and also has a very affordable price compared to its other competitors. We assure you that we provide you a product with the highest quality.